11
Software control panel
1. Sample rate settings
Select your desired sampling rate from 44.1kHz
to 192kHz on the pull down window shown in
Diagram 24. Click "Apply" after the selection
has been made to set the value.
2. Buffer Size settings
You may select the buffer size for "Streaming"
and "ASIO". Click "Apply" after you have made
the selections.
Note:
If a clicking sound occurs, you should
change to a larger buffer size for the settings.
If the largest buffer size has been selected and
there is still a clicking sound, it means your
computer performance is not able to handle the
task. (It is not caused by the MicU digital audio
interface)
3. Device settings
Shows the serial number & product ID of your
MicU device. If it doesn't show, it means your
device is not properly installed. Please go
through the “Driver Installation” process again
(Page 8).
4. Monitor Mixer
Click this button to launch the "Monitor Mixer"
(Page 12)
5. Playback Mixer
Click this button to launch the "Playback Mixer"
(Page 13)
Diagram 24
Diagram 24
Diagram 25
Diagram 26
