7
1
6
3
4
8
7
5
2
Front Panel
1. 3-pin XLR (Balanced) – For condenser microphone with +48V
phantom power or dynamic microphone.
Please refer to P.25 for the connection method of different types of microphones
and instruments.
1/4” TS (Unbalanced) – For dynamic microphone
Please refer to P.25 for the connection method of different types of microphones.
2. 48V phantom power switch
Press to 48V phantom power to the associated XLR input. This phantom
power circuit is suitable for most condenser microphones.
3. Input gain level control (Microphone)
This potentiometer controls the input level of the analog microphone input.
4. Input gain level control (Guitar)
This potentiometer controls the input level of the instrument input.
5. Headphone level control
This potentiometer controls the output level of the headphone output.
6. Headphone output
This output jack accepts a standard 1/4″ stereo TRS headphone connector.
7. Mon (Monitor – Control smart phone & PC monitoring signal)
Switch between monitoring smart device with PC signal or only PC’s signal
8. LLB (Live Loopback)
Smart device audio output signal loopback to smart device’s input for live
session purposes.
