ICON ITSTC73 Series, Руководство пользователя и инструкции по безопасности

Страница: 12 / 22

Page 4
73" TOP CHEST
For technical questions, please call 1-888-866-5797.
Reconfiguring Drawers
1. The Drawers can be rearranged.
WARNING! TO PREVENT SERIOUS INJURY AND
DEATH FROM TIPPING: All drawers must be reinstalled
before use. Do not use a partially assembled Chest.
2. Remove the Drawers you want to move.
To remove a Drawer:
a. Slide the Drawer out until it stops
and empty it completely.
b. There is a small lever at the end of each
Chest Slide (17). Push up on the right lever,
and push down on the left lever.
c. While holding the levers, slide the Drawer out
completely and set it on a flat, stable surface.
Chest Slide (17)
lever
Figure B
3. After removing the Drawers, check where the slides
are positioned on them. All the slides on each
Drawer must be fully supported by Chest Slides.
4. Reposition Chest Slides as needed to properly support
the Drawers as explained in the two following steps.