ICON iKeyboard 3Nano, Руководство пользователя

Страница: 14 / 22

14
2.0 General setting to the keyboard
2.1 “Save file” button
Click this button to save your current settings for the ikeyboard Nano. The file is an
“ikeyboard Nano” file.
2.2 “Load file” button
Click this button to load a previously saved “. ikeyboard Nano” setting file for your
ikeyboard Nano.
2.3 “Send Data” button
Click this button to upload the iMap
TM
software settings to your ikeyboard Nano via USB
connection.
( Note: You must have connected your ikeyboard Nano to your Mac/PC, otherwise the
settings upload will not be successful.)
2.2
2.5
2.4
2.1 2.3
Section 2
2.4 “MIDI Devices” button
Click this button, a MIDI device select window will appear as shown in diagram 10. Please
select “ICON ikeyboard Nano” for the MIDI Out Devices.
(
Note:
Please make sure you have pressed this button every time you launched iMap,
select your ICON product on the MIDI input-output Device pop-up menu to make sure the
communication between iMap and your ICON product is created successfully.)
Diagram 10
2.5 “Firmware Upgrade” button
Click this button to enter into the firmware upgrade window for ikeyboard Nano. Please refer
to P.15 for the firmware upgrade procedure.