8
Mac driver installation
CubePro-VST is a class compliance device. Thus there is no driver installation
needed for Mac. Also, it is fully supporting iOS devices by connecting to a
camera kit.
Please follow the step-by-step procedures below to install your CubePro-VST USB
recording interface.
1. Turn on your Mac
(
Note:
Do not connect the CubePro-VST digital audio interface to your Mac yet.)
2. Class compliance device
CubePro-VST is class compliance on Mac OSX, no driver installation is needed.
3. Copy the software control panel shortcut logo to your
desktop
Open the previous “Mac” folder. Copy the “ProDriver VST” software panel
shortcut logo and paste it to your desktop.
4. Launch the software control
panel
Click the CubePro-VST’s software
control panel shortcut logo you have
just copied to your desktop to launch
the software control panel.
Diagram 1
Mac
Diagram 2
