USB 2.0 CONNECTOR
LINE OUTPUTS 1/2
S/PDIF COAXIAL I/O CONNECTORS
MIDI I/O CONNECTORS
POWER SUPPLY CONNECTOR
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed
of Cube 4 Nano.
These are unbalanced analog outputs on standard 1/4 TS connectors at
+6dBU line level.
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the Cube 4 Nano's software control panel, while the digital
output will be sent to the coaxial.
MIDI input and output on standard 5-pin DIN connectors
Cube 4 Nano is USB-bus powered. If your computer does not supply
sufficient power, connect a ICON 5VDC power supply adapter to this jack.
"
(Note: You can get the power adapter from ICON distributors/dealers near you)
Rear Panel - Cube DJ
USB 2.0 CONNECTOR
LINE INPUTS 1/2 & 3/4
LINE OUTPUTS 1/2 & 3/4
MIDI I/O CONNECTORS
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed of
Cube DJ.
These are unbalanced analog inputs on RCA connectors at –10dB line level.
These are unbalanced analog outputs on RCA connectors at +6dBU line level.
MIDI input and output on standard 5-pin DIN connectors
