
7
Rear Panel
1. USB 2.0 connector
Connect it with the provided USB cable to your Mac/PC/iOS device camera kit’s
USB connector. Your Mac/PC must have a USB2.0 connector in order to run the
full speed of Cube4Nano-VST.
2. Line outputs 1/2
These are unbalanced analog outputs on standard 1/4″ TS connectors at +6dBU
line level.
3. S/PDIF Coaxial I/O connectors
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the Cube4Nano-VST's software control panel, while the digital
output will be sent to the coaxial.
4. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors.
5. Power supply connector
Cube4Nano-VST is USB bus powered. If your computer does not supply
sufficient power, connect an ICON +5VDC power supply adapter to this jack or
use a standard phone charger/power adapter with the correct USB cable.
(
Note:
You can get the power adapter from ICON Distributors/dealers near you.)
1
5
3
4
2