iCON iPROTECT Instruction Manual Rev 4.4
13
14. Boosting Mode - Electrical Connections; floats or probes
The controller is rated IP54. It should be installed vertically where it has excellent
ventilation away from direct sunlight or exposure to adverse weather. Installation
inside a separate open fronted enclosure is suggested.
Any electrical alterations or additional connections should be carried out by a
suitably qualified technician. Ensure suitably rated circuit breakers are installed.
Isolate the controller before opening the cover to access the low voltage circuit
connections.
Fitting floats or probes to
register the pump inlet
source liquid level will
achieve the maximum
protection against pump
dry-running.
The under-load function of
the iPROTECT also acts as
a reliable automatic stop
function against pump dry-
running. Jumpers can be
fitted between terminals 4,5
and 6 if preferred
