ICON ATV08, Руководство пользователя

Страница: 19 / 32

ICON EV Manual Operation and adjustment ATV08 19
Common sense use of the braking system:
• When the distance between the brake
shoe block and the rim is too large, it
is adjusted by the brake handle or the
adjusting screw on the folder gate device.
• When the lines of the brake shoe block
are worn seriously, replace it timely in
order to maintain traffic safety.
• When not riding for a long time, please
loosen the folder device to avoid fatigue
of flexibility, but pay attention to recovery
of the gate device before riding.
• When riding on rainy days, the function
of any gate device will be weakened,
so please keep a longer safe braking
distance and reduce the speed.
• The surface on the brake disc, shoe
block may not be oiled, so as to avoid
serious injury.
• If the brake cable is ripped, it may cause
the brake cable to be broken and this is
very dangerous, please replace it timely.
Speed control system
The speed control system is used to cater for
various terrain and clockwise and counterclockwise
wind conditions, and to mix with physical strength
appropriately. The entire speed control system includes
a Derailleur, front and Back fender, chain plate, and
flywheel and shift cables.
The number of the speed change series is the number of
fluted disc × the number of flywheel pieces.
For example: three pieces of chain plate× 6 flywheel
pieces = 18 speed change series, and so on.
Derailleur
Type of Derailleur (as shown)
The Derailleur is separately
positioned on both sides of
the Across handle Stems, and
the left controls the forward
speed and the right controls
the backward speed.