2
3.
The passenger side upper shock mount needs to be sanded slightly in order for the ICON shock to fit.
[FIGURE 2 & 3]
4.
Paint all exposed metal to prevent rust.
5.
Install the ICON rear shocks using a 15mm and an 18mm socket/wrench. The reservoir points away from the axle.
[Torque to factory spec]
[FIGURE 4 & 5]
6.
Reinstall wheels and tires. Get vehicle professionally aligned if coilovers or spacers were installed on the front.
7.
Refer to IIC install instructions for wiring and routing information.
FIG.4
FIG.5
RETORQUE ALL NUTS, BOLTS AND LUGS AFTER 100 MILES AND PERIODICALLY THEREAFTER.
VERIFY ALL FASTENERS ARE PROPERLY TORQUED BEFORE DRIVING VEHICLE.
FIG.2
FIG.3
