Icon Process Controls truflo Ultraflo UF500, Инструкция по эксплуатации

Страница: 5 / 11

2
Installation and Connection
Brown DC+
Black DC- / 4-20mA
Gray 4-20mA+
Blue RS485 A
White RS485 B
Step1:
Make sure no dirt, paint, or other
stains on the surface of the tube. Then
position on the underside of the pipe.
Step3:
Slowly remove the protective
cover off the sensor.
Step5:
Connect the M cable .
Step2:
Align the upper bracket to the
pipe position. Using the mounting screws
connect the upper and the lower brackets
together. Ensure that the parts are snug,
but DO NOT over-tighten.
Step4:
Position the display over the
upper bracket and connect using the
mounting screws. DO NOT over-tighten.