ICON ProAudio V1-X, Руководство пользователя

Страница: 12 / 49

12
1.Connect the V1-X to your Mac/PC via the USB C port and select
the system
Choose a USB port on your Mac/PC and insert the USB C cable. Connect the cable’s
other end to the V1-X.
When switching on for the first time, press down rotary encoder #4 (4th from
left). Now, turn on the V1-X whilst pressing the encoder. This will launch the
system selection interface on the V1-X’s screen.
‘Windows or Mac. Select your system.’ will be displayed on the screen. Please
select the relevant system and continue. You do not need to repeat this step unless
you wish to change the system, (i.e. if you select Mac now, but wish to select
Windows in the future).
2. Configure the 3x DAWs you wish to connect to
You will have already allocated 3x DAWs in the V1-M iMAP and assigned them to the 3x
DAW buttons on the V1-M, (see the iMAP section of the V1-M manual).
These are the DAWs that are used as examples in the V1-M manual;
Getting Started with the V1-X
DAW #1 Bitwig
DAW #2 Cubase
DAW #3 Logic
For clarity purposes, we'll continue to use these examples in the following pages to
demonstrate how you will configure the DAWs to the V1-X.
Firstly, let's get one thing very clear;
You do NOT need to allocate DAWs to the V1-X so that it recognizes which is
DAW#1, DAW #2 is and so on. You've already set that up on the V1-M. This will be
communicated to the V1-X. Please make sure you switch on your iMAP first at all
times when using the V1-M/X system so that the V1-M will be able to communicate
with the V1-X.
Now, you only have to ensure that the DAW programs know the V1-X and the V1-M
are trying to communicate to them.
Read on to find out how.
1
Win
Mac
Press down the 4th rotary encoder
and switch on the V1-M V1-X.
Press the corresponding button at
the bottom of thescreen according
to the system you need to select.
Select your system.
When turning on for the 1st time