10
8. Various function controls
1. Auto Voice Over -
Voice over function will activate automatically when
signal is detected from microphone inputs.
2. Manual Voice Over-
Press and hold to activate the Voice Over function -
release to de-activate it.
3. Mic. Mute button -
Press to mute all microphone input channels.
4. Monitor Mute button -
Press to mute the headphone HP output.
5. Noise Reduction button -
Press to activate the noise reduction function.
6. LoopBack button -
Press to activate the loopback function. The signal on the
type C connection (PC or mobile device) will be ‘looped
back’ from its output to its input.
9. Mode presets
There are 6 different mode presets with different settings when using input/
output, DSP effect and monitor settings etc. They are designed for different
application needs. Please refer to the following table chart for the different
settings in each mode.
Chat Music Gaming MC Karaoke
Monitor : Wet
Record : Dry
OTG out
Signal
(3.5mm/
Type C
)
No DSP Effect
(Microphone)
√
√
√
√
With DSP Effect
(Microphone)
√
AUX
√
√
√
OTG (3.5mm / Type C)
LoopBack On/Off
Output
Signal
(HP/Libe
Out)
No DSP Effect
(Microphone)
√
√
√
√
With DSP Effect
(Microphone)
√
√
AUX
√
√
√
√
OTG (3.5mm /
TypeC)
√
√
√
√
√
√
Note:
Aux - Including the signal sources from samplers, 3.5mm stereo line-in
& Bluetooth BGM in)
OTG - Including the 3.5mm stereo jack (analog) & the Type C connector
(Digital)
10. EQ (Hi / Mid / Low) control knobs
There are 3 EQ control knobs for adjusting Hi / Mid / Low EQ parameters.
