13
Rear Panel
1. Power supply connector
A +12V DC power supply adapter is required to power the 32Ci (supplied).
(
Note:
You can purchase replacement power adapters from ICON distributors/
dealers near you)
2. USB connector (Type C)
Connect it with the provided USB cable (Type C) to your Mac/PC/iOS device
camera kit’s USB connector. Your Mac/PC must have a USB2.0 connector in
order to run the full speed of the 32Ci.
3. Mobile Out (Digital - Type C & Analog - 3.5mm TRRS)
These ports allow you to connect your smart device and your Mac/PC
simultaneously, so you may process the audio signal with your Mac/PC before
delivering signal to the smart device for live streaming applications.
Digital - Type C jack for connecting directly to the digital jack of the smart device
(OTG adapter required)
Analog - TRRS stereo jack for connecting directly to smart device’s audio I/O
4. ADAT I/O
Connect your ADAT equipped device here via an optical cable with Toslink
convertors for up to 8 channels.
5. MIDI I/O connectors
MIDI input and output standard 5-pin DIN connectors.
6. Outputs
MAIN L/R - These are balanced analog outputs on 1/4″ balanced TRS
connectors at +4dBU line level. These outputs should normally
be connected toyour main monitors, (this connection is designed
for 'pro' level monitors).
ALTERNATE L/R - These outputs can be connected to a pair of alternate
monitors. The alternate monitoring option is triggered by
pressing the 'Alternate' button. If no alternate monitoring
is connected, the 'Alternate' button effectively becomes a 'MUTE'
button for the MAIN L/R monitors, when it is pressed.
1
2
3
4
5
8
7
9
6
