ICON Health & Fitness Pro-Form SPORT 4.0, Руководство пользователя

Страница: 12 / 32

12
11
11. Insert the wires (L) into the Right Handrail (64)
through the indicated hole (M) as you set the
console assembly (G) on the Left and Right
Uprights (66, 76). Make sure that no wires
(M, K, 78) are pinched.
See the inset drawing. When setting the
console assembly (G) onto the Left and Right
Uprights (66, 76), make sure that the indicated
flanges (N) (only one is shown) on the Console
Base (58) do not sit on top of the Left or Right
Uprights. They must be on the sides of the
Uprights as shown.
Attach the console assembly (G) with ten #8 x
3/4" Screws (4); start all ten Screws, and then
tighten them. Do not overtighten the Screws.
Firmly tighten the six 3/8" x 3 1/4" Screws
(2) on the lower ends of the Left and Right
Uprights (66, 76) (only one side is shown).
4
4
4
4
4
64
2
L
K, 78
76
M
66
G
N
58
66
10. With the help of a second person, hold the con-
sole assembly (G) near the Right Handrail (64).
See the inset drawing. Connect the Upright
Wire (63) to the console wire (J). The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER. Then, remove the wire tie (C)
from the Upright Wire.
Connect the Console Ground Wire (78) to the
ground wire (K) on the Console Crossbar (61).
64
10
63
61
J
78
G
J
K
63
C