8
5. Slide the Seat (23) to the front of the Rail (2).
Next, attach a Stop (32) to each side of the Rail
(2) with an M4 x 19mm Screw (69).
Then, attach the Rail Cap (38) to the Rail (2)
with two M4 x 19mm Screws (69).
2
5
6
38
69
69
A
B
C
C
D
D
E
51
32
32
23
69
69
6. The Console (51) requires four AA batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may dam-
age the console display or other electronic
components.
Remove the screw (A) and the battery cover (B)
from the top of the Console (51). Then, pull out
the battery holder (C) and insert batteries (D)
into the battery holder; make sure to orient the
batteries as shown by the diagram inside the
battery holder. Then, reinsert the battery holder
and reattach the battery cover.
See the inset drawing. Make sure that the
batteries (D) are facing upward and that the
contacts (E) on the batter holder (C) are facing
downward when you insert the battery holder.
7. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.
Place a mat under the rower to protect the floor.
E
Содержание PRO-FORM 550R
Страница 4: ...UTS 4 all STANDARD SERVICE PLANS...
Страница 17: ...17 NOTES...