ICON Health & Fitness PRO-FORM 250i, Руководство пользователя, Страница: 14 / 32

14
16. Remove and discard the wire tie on the Main
Wire (32).
While a second person holds the Console (30)
near the Upright (2), plug the Main Wire (32) and
the Pulse Wire (31) into the matching recep-
tacles on the back of the Console.
The connectors on the Main Wire (32) and
the Pulse Wire (31) should slide easily into
the receptacles and snap into place. If a con-
nector does not slide easily into a receptacle,
turn the connector and try again. If you do not
connect the connectors properly, the Console
(30) may become damaged.
Then, insert the excess wire into the Upright (2).
Tip: Avoid pinching the wires. Attach the
Console (30) to the Upright (2) with four
M4 x 16mm Screws (56) start all of the Screws,
and then tighten them.
See step 5. Tighten the M10 x 20mm Screws
(74) and the M10 x 60mm Bolt (72). Then, press
the Accessory Tray (50) into place.
2
56
31
30
32
16
Avoid pinching
the wires
30
92
73
15
15. Attach the Tablet Holder (92) to the back of the
Console (30) with four Tablet Holder Screws
(73); start all of the Tablet Holder Screws, and
then tighten them.