
28
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first unplug the power adapter.
See EXPLODED DRAWING A on page 34. Using
a standard screwdriver, gently release the tabs on the
Top Shield (44), and slide the Top Shield upward.
Next, identify the Access Cover (40). Remove the
M4 x 16mm Screw (77) from the Access Cover, and
then remove the Access Cover.
See the drawing at the right. Locate the Reed
Switch (46). Turn the Left Crank Arm (24) until a Pulley
Magnet (30) is aligned with the Reed Switch. Then,
slightly loosen the indicated M4 x 16mm Screw (77),
slide the Reed Switch slightly closer to or away from
the Pulley Magnet, and then retighten the Screw.
Plug in the power adapter, and turn the Left Crank
Arm (24) for a moment. Repeat these actions until the
console displays correct feedback.
When the reed switch is correctly adjusted, unplug
the power adapter and reattach the parts that you
removed. Then, plug in the power adapter.
24
30
77
46