ICON Health & Fitness NordicTrack Commercial X11i, Руководство пользователя

Страница: 30 / 40

30
SYMPTOM: The incline trainer will not connect to
the wireless network
a. Make sure that the wireless settings on the console
are correct (see page 25).
b. Make sure that the settings for your wireless net-
work are correct.
c. If you still have questions, go to support.iFit.com.
SYMPTOM: The incline of the treadmill does not
change correctly
a. Calibrate the incline system (see step 4 on
page 24).
SYMPTOM: The displays of the console do not
function properly
a. If the console does not boot up properly, or
if the console freezes and does not respond,
reset the console to the factory default settings.
IMPORTANT: Doing this will erase all the
custom settings you have made to the console.
Resetting the console requires two people. First,
press the power switch into the off position. Next,
locate the small reset opening (B) on the side of
the console. Using a bent paper clip (C), press and
hold the reset button inside the opening, and have
a second person press the power switch into the
on position. Continue holding the reset button until
the console turns on. When the reset operation is
complete, the console will turn off and then turn
back on. If it does not, use the power switch to
turn the incline trainer off and then on again. Once
the console turns on, check for
fi rmware updates
(see step 3 on page 24). Note: It may take a few
minutes for the console to be ready for use.
a
B
C