13
8.
Set the console assembly (G) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(H). Then, remove the Pulse Crossbar (80).
G
80
H
8
H
80
9
8
8
2
2
2
2
6
6
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (80), do not use power tools, and
do not overtighten the #10 x 3/4" Screws (6)
or the 5/16" x 2" Screws (2).
Orient the Pulse Crossbar (80) as shown. Attach
the Pulse Crossbar with two of the 5/16" x 2"
Screws (2) that you removed in step 5, two 5/16"
Star Washers (8), and two #10 x 3/4" Screws (6);
start all four Screws, and then tighten them.
Then, tighten the other two 5/16" x 2"
Screws (2).
