43
SYMPTOM: The incline of the treadmill does not
change correctly
a. Calibrate the incline system (see step 4 on
page 35).
SYMPTOM: The iFit workouts do not function
correctly
a.
If the iFit workouts are not functioning correctly,
make sure that the treadmill has the most current
firmware available (see step 3 on page 34).
SYMPTOM: The treadmill will not connect to the
wireless network
a.
Make sure that the wireless settings on your con-
sole are correct (see step 4 on page 35).
b.
Make sure that the settings for your wireless net-
work are correct.
c.
If you still have questions, see the front cover of
this manual.
SYMPTOM: Digital TV reception is poor
a.
Make sure that the digital TV settings are set cor-
rectly. See HOW TO ADJUST THE TV SETTINGS
on page 38.
b.
For the digital TV to operate properly, good recep-
tion is necessary. If you are using an antenna,
make sure that it is properly connected and
adjusted for optimal reception. See HOW TO
CONNECT AN ANTENNA on page 21.
c.
Check for the problems listed below and follow the
applicable instructions:
•
Ignition (black spots or horizontal streaks that
appear or a picture that
fl
utters or drifts)—
Usually this is caused by interference from
automobile ignition systems, neon lamps, electric
drifts, or other electric appliances. Try changing
the position of your
fi
tness equipment or other
electric appliances to correct the problem.
•
Ghosts—Ghosts are caused by the TV signal fol-
lowing two paths—one is the direct path and the
other is re
fl
ected from tall buildings, hills, or other
objects. Change the direction or position of the
antenna to improve reception.
•
Blue Screen—If your
fi
tness equipment is
located in the fringe area of a TV station where
the signal is weak, the picture may be of poor
quality or a blue screen may appear. If the signal
is weak, it may be necessary to install an exter-
nal antenna to improve the picture.
•
Fading—If blocks of the picture are missing, the
picture moves around the screen, or the picture
disappears, the signal may be weak. Change the
direction or position of the antenna to improve
reception. Make sure the digital TV settings
are set correctly (see HOW TO ADJUST TV
SETTINGS on page 38). Do not use a splitter.
Note: If one of these problems appears when the
cable from a CATV company is connected, the
problem may be caused by the cable company
broadcast.
SYMPTOM: The digital TV is not receiving a signal
a.
Make sure that the correct input source is selected.
See step 2 on page 36 to select an input source.
b.
Make sure that the antenna cable or CATV cable is
connected securely to the treadmill. See page 21 to
connect a CATV cable to your fitness equipment.
c.
Scan for broadcast or cable signals. See step 4 on
page 38 to scan for signals.
d.
Due to an FCC requirement, analog signals are no
longer broadcast over the air in the United States
as of June 12, 2009. If you wish to view television
signals through an antenna, you must have an
antenna capable of receiving digital signals. Cable
television has not been affected.
SYMPTOM: The digital TV needs to be cleaned
a.
UNPLUG THE POWER CORD.
To clean the digital
TV, wipe the digital TV and screen using a soft
cloth with a small amount of soft detergent. Do
not use a polishing cloth, solvent, or any type of
propellant or chemical detergent such as alcohol or
benzene.
Содержание FREEMOTION 890 INTERACTIVE
Страница 6: ...6...
Страница 7: ...7 all STANDARD SERVICE PLANS...
Страница 51: ...51 109 97 98 113 115 1 1 87 5 5 88 5 103 EXPLODED DRAWING E Model No SFTL19513 7 R0916A...
