10
Step 3:
Using the hooks at the back end of the
Sliding Lid Handles
supplied with the
Slimline Burner
,
lower the
empty
Slimline Burner
into the
Burner Tray
cut out as shown below. Do not do this
if the
Fuel Tank
contains fuel.
Step 4:
Make sure that the burner is facing the right way as per image below. After the burner has
been inserted hook the
Fascia
onto the
Wall Box by aligning the four holes in the back of
the fascia with the four hooks (Fascia assembly clips) on the front of the wall box.
Fill the
Slimline Burner
with the appropriate fuel, ignite and enjoy. Please refer to instructions in the
Slimline Burner Manual
supplied with the
Slimline Burner
for the appropriate manner in which
to do this.
Fascia Assembly
Burner Vents positioned at
the back when the Sliding
Lid is in the open position
Sliding Lid all the way
forward and in the
open position.
Wall Box Back
