icon Audio MB 845i Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 9

Page 9

9 Guarantee

Thank you for purchasing one of our amplifiers. We
hope you will be pleased with it.

This amplifier is guaranteed by the dealer you
purchased from for 12 months from the date of
purchase for parts and labour, excluding
shipping. Valves are consumables and therefore
on a 12 months pro-rata wear basis. Please keep
your receipt as proof of purchase, this will be
needed.

All units are individually tested for performance for at
least six hours before despatch to you. In the unlikely
event  that  you  believe  the  unit  is  not  functioning
correctly,  it  may  be  helpful  to  contact  us  first  as  we
may  be  able  to  assist  you.  Then  we  would  request
that you return the item to us for further action.

You  are  advised  to  inform  us  of  any  change  of
address or change of ownership in order that we may
keep  you  up  to  date  of  any  upgrades  or
improvements. Check our website.

Exclusions

Claims for any damage to either amplifiers or valves
must be reported within three days of receipt.

This  amplifier  is  designed  for  normal  domestic  hi  fi
use.  It  is  not  guaranteed  for  commercial,  Public
Address  use,  or  use  in  other  situations.  The

guarantee becomes void if the unit has been
modified in any way not approved by Icon Audio.

10 Packing Instructions

It is essential that the original box and packing be
kept in good condition, as this provides vital
protection during transit. Please do not write on
box, but use removable labels.

Should the original

box and packaging be lost or become unusable a
repacking charge of one hundred pounds will be
made.



Re-use the supplied plastic bag to keep the

amp clean and free from damp.



The mains lead fits in a foam cut-out

underneath the amplifier.



Send the valve covers and valves in the
separate supplied box. See above for
valve removal.



Valves should be removed, numbered and

packed in “Bubblewrap” or similar for
protection inside the valve cover.



If the amplifier is stored in the box, keep

upright.



Do not store in damp conditions as the

transformer windings may corrode.



If the amplifiers are shipped insurance is

desirable due to the high unit value.

icon Audio

UK LTD

351 Aylestone Road Leicester LE2 8TA

Email: [email protected] Website: www.iconaudio.com

Phone +44 (0) 116 244 0593 Cell +44 (0) 778 715 8791

Fax 0116 244 0593

2019-07-26 G version

«
...
7
8
9

Содержание MB 845i










Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды