5. TROUBLESHOOTING
• It is normal for the motor to make noise while in use.
• If the remote control doesn’t normally work, please check that the plug and socket are properly connected and the switch
is turned on.
• When the programmed working time is over, the chair will power-off automatically.
• After several uses, the chair might power-off because of overheating. It can be used again after half an hour of cooling
time.
6. FEATURES AND BENEFITS
Ease your tension and massage away stress with our top-of-the-line iComfort® ic7000 Massage chair. You will feel as if
you had your very own massage therapist. The Body Scanning Technology maps the body of each individual user to
provide a customized massage. The handy articulated footrest gives you maximum configuration options. The iComfort®
ic7000 massage chair reproduces over 5 massage therapies designed to offer you the sensation of a professional
massage in the comfort of your very own home! The iComfort® ic7000 massage chair will provide you with many years of
soothing massage and comfort.
7. INSTALLATION
The ic7000 massage chair comes partly assembled.
• Assemble the massage chair according to the installation instructions provided in this guide.
• Check the parts list carefully to make sure nothing is missing.
• Sitting in the massage chair before it is completely assembled could result in permanent damage to the chair
and personal injury.
•
The ic7000 massage
chair is equipped with a cord having a grounding conductor. The plug must be
plugged into an appropriate socket that is properly installed.
•
If the massage chair
fuse is burned out, please turn the chair off and unplug the power. You can open the lid
covering the fuse located in the switch box at the bottom of the chair in the back.
A) Unplug the AC connector of the chair
B) Insert a screw driver under the fuse symbol
C) Gently lift the cover and the fuse will come out at the same time
Use a same size and type of fuse to replace the old one and then cover the lid. You can call iComfort® at 1-866-967-7333
ext 227 if you need help.
CAUTION: Never substitute a missing part with one of your own. If a part is missing, contact customer service at: 1-866-
967-7333 ext 227
Step 1:
Unpacking
1) Remove the box with the shoulder massage pads before removing the chair from the box.
2) Use one hand to hold the leg rest and the other hand to hold the steel tube attached to the backrest. (See
Illustration). This step requires two people on both sides to lift the chair out of the box.
