Important: The must be 10 cm between the back wall and the massage chair backrest in the upright
position. Also, please keep at least 30 cm of free space in front of the massage chair before activating it.
Press on the power switch on the massage chair. When the power is on, the chair will activate the acupuncture
body scanning feature. Make sure your feet are well tucked in for your body to be measured correctly. If you
prefer the chair to massage higher or lower, you can use the up or down button. The default massage time is 20
minutes.
Pressing again the On/Off button will deactivate the chair, stop the massage and have it return to its original
upright position.
AUTOMATIC MASSAGE MODE
Press on the Menu
button. The massage chair remote control shows ‘Auto’
. Press OK
and then
scroll down
to the automatic massage mode of your choice: Recovery, Pain Relief, Stretch, Experience and
‘Special’ mode. Press
to select the one you prefer and your massage will start.
Special
The Special mode offers you the choice between
‘White-collar’, ‘Shopaholic’, ‘Back Yoga’, ‘Athlete mode’ or ‘Care
of aged’. Press on
to select the one you prefer and your massage will start.
MANUAL MASSAGE MODE
Mode
Press on the Menu
button. The massage chair remote control shows ‘Auto’. Scroll the menu down using
the
direction key to Manual
. Press
. You can choose between 5 massage modes: Knead,
Tap, knock, Knead & tap, Shiatsu. Scroll to choose the massage mode you desire and press
.
Position
Scroll the menu down using the
direction key to choose the massage position. There are three positions to
choose from: Overal, partial and fixed point. Scroll to the one you desire and press
.
Width
