Icom VE-PG4, Руководство по эксплуатации

Страница: 83 / 423

6
TRANSCEIvER CoNTRoLLER
6-12
Area Call screen
Transceiver Controller > RoIP Server Settings > Area Call
■
Access Point Search
The RoIP Gateway can search for access points the network, and register access points for Area Calls.
L
Icom guarantees this function only for the AP-90M and AP-95M. (As of May, 2019)
1
2 3
4
5
6
1
IP Address Range ���� Click the <Search> button after entering the IP address range of the
access points.
When starting a search, the button changes to both <Refresh> and
<Cancel>.
The discovered access point information will be displayed in a list.
L
When only IP start address is entered, a search starts.
L
If BSSID is already registered in the Area Entry List, it is not displayed.
L
When the [IP Advanced Radio System] setting of an access point that is set
to “Enable” in [Notification] that is same Tenant (Fleet) Number with the RoIP
Gateway, and a name is registered, you can search for the BSSID and
name. When it is set to “Disable,” you cannot search with the RoIP Gateway.
(AP-95M Wireless LAN1 IP Advanced Radio System screen)
2
Check Box �������
Click a Check Box to add a check mark for registering a discovered
access point.
L
By clicking [All], you can select or cancel all access points in the list.
3
Name ����������
The name that is set in [IP Advanced Radio System] of an access point
is displayed.
L
An area name is registered on [Number] in [Area Setting].