3
Knowledge Base |
©2021 Icom America Inc. The Icom logo is a registered trademark of Icom Inc.
Channel Squelch
In Simple Mode, the Squelch setting can only be changed using the push buttons as described in the
Operating Guide.
Programming in Full Mode
The full suite of features is available in Full Mode.
Memory Channel Programming
See instructions for Simple Mode-Memory Channel Programming
Channel Squelch
The squelch setting allows you to adjust the sensitivity of your radio’s receiver.
In Full Mode, the squelch setting can be changed in 2 different ways:
•
Using the buttons on the radio, by default. Please refer to your instruction guide for steps.
•
Using the programming software in Full Mode, using the
Common
>
Set Mode
window.
1.
Go to
Common
>
Set Mode
.
2.
Click
SQL Level
and select the desired number. Note: A setting of
2
is optimal.
Scan Programming
Assumptions:
•
Software is in Full Mode
•
SQL Level is set correctly
•
Frequencies and sub-audible tones have been programmed in and tested for correct
communication.
Note: For complete descriptions of these settings, please refer to the Help files in the programming
software.
1.
Scan Settings screen
- Set Power-On Scan to one of the following choices:
•
Off
- User will have to press the Scan Start/Stop button to start a scan after power up.
