background image

1

1

PREPARATION

System requirements

The following units and/or environments are required
to build D-STAR gateway server. 

D

D

PC

• OS

: Linux

®

(updated)

Compatible distribution:

Fedora Core 2 or RedHat

®

Linux

®

9

Compatible software version

Linux

®

Kernel 2.4.20 or later

glibc 2.3.2 or later
BIND 9.2.1 or later

• CPU

: Pentium

®

grade 2.4 GHz or faster

• Memory

: At least 512 MB

• LAN board

: 2 

(NIC from Intel

®

is recommended)

• HDD 

: At least 10 GB of free space 

(incl. OS

installation)

D

D

Internet line

• Line speed : 750 kbps or more 

(recommended effec-

tive speed*)

for both uplink/downlink

*Ask the ISP for effective speed.

D

D

Fixed IP address

• Apply to the ISP to acquire a fixed global IP address.

D

D

Router

Following functions are required for the router.
• Remote access function 

(the port forward, DMZ etc.)

• Capability of setting a fixed IP address, such as

PPPoE for WAN

• NAT/IP masquerade
• Static IP masquerade/DMZ
• IP filtering function
• DNS answering function
• Static DHCP server setting for LAN
• Class A subnet mask 

(255.0.0.0)

can be set for LAN

(For your information: The router, WRV54G from

LINKSYS, covers all the requirements as above.)

*Ask the ISP for recommended router model.

D

D

Down loading the OS

Down load the Linux

®

OS ISO images from the ap-

propriate distributor’s site.
See p. 2 for the address.

D

D

Recording the CD

Records the down loaded ISO image into the CD.
The ISO image is the same format as the recorded in
a CD. When this ISO image is recorded in CD as a
file, OS cannot be installed with the CD.

NOTE: 

See the instruction manual of the CD writ-

ing software about a detailed operation, the ISO
image recording procedures, etc.

Linux

®

down loading

NOTE: 

If you have Linux OS CD (specified distribu-

tion and software version), skip this instruction and
refer to “

Linux

®

OS installation” 

(p. 2)

.

The following hardware and software are required for
Linux

®

OS down loading.

• Another PC

The PC must be connected to internet.

• CD-R drive
• CD writing software

The software have capability to burning
a CD with an ISO image.

Содержание RS-RP2C

















Отзывы: