1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-6573H-1EX
Printed in Japan
■
Mounting
2 types of mounting styles are available— one is overhead
mounting, and other one is on-board mounting.
Mount the front panel and the attachment securely with the
4 supplied screws to a thick surface which can support more
than 1.5 kg. (Overhead mounting)
On-board mounting
Overhead mounting
When using
self-tapping screws
Flat washer
Spring washer
Bracket
screw
Bracket screw
■
Attachment
For the front panel attachment:
q
Connect the optional OPC-607, OPC-608 or OPC-609 to
the front panel attachment as shown below.
After the cable connection, replace the removed rear plate
and the 4 screws.
• The optional cable can be inserted into either the left or right
grooves as desired on the back of the attachment.
w
Connect the flat cable (
q
) as shown below, and then at-
tach the front panel and the attachment (
w
).
• Ensure the flat cable is inserted correctly, and not upside down.
For the main body attachment:
e
Connect the optional OPC-607, OPC-608 or OPC-609 to
the main body attachment as shown below.
After the cable connection, replace the removed rear
plate.
• The optional cable can be inserted into either the left or right
grooves as desired on the back of the attachment.
r
Connect the supplied flat cable* and ground cable
(coming
from the RMK-3)
as shown below.
*Ensure the flat cable and attachment are inserted/attached cor-
rectly, and not upside down.
t
Replace the removed bottom cover and 4 screws, then re-
connect the DC power cable.
Main body attachment
to transceiver’s
main body
Main body
Main body attachment*
Flat cable*
Flat cable*
from the RMK-3
Use the attached screw
OPC-607/
OPC-608/
OPC-609
Rear plate
Main body attachment
Cable groove
Use the screw re-
moved from the cir-
cuit board in step
t
on the front page, to
connect the cable lug.
Front panel
Front panel attachment
Flat cable
q
w
Attach the front
panel and attach-
ment securely.
OPC-607/
OPC-608/
OPC-609
Rear plate
Front panel attachment
Use the screw re-
moved from the cir-
cuit board in step
t
on the front page, to
connect the cable lug.
Cable groove
Printed on recycled paper with soy ink.
