5
2
PANEL DESCRIPTION
#5
COMPASS INDICATOR
(pgs. 24, 39)
• GYRO
: NMEA (gyro) is connected.
• COMPASS
: NMEA (compass), N+1 or AUX data is
connected.
#6
EBL1/ 2 READOUTS
(pgs. 15–16)
Shows the bearing of the displayed Electronic Bear-
ing Lines (EBL1 and EBL2) when the EBL is in use.
• EBL2 shows PI (
!0
) readout.
#7
WAYPOINT/MOB READOUTS
(p. 13)
➥
Shows the bearing and distance to the waypoint
received from navigation equipment.
• This readout appears when the “WPT” of the FUNC-
TION menu is turned ON.
• To display the waypoint/MOB marker, bearing data
and NMEA data with 0183 format is necessary.
(p. 39)
➥
Shows the bearing and distance to the MOB
(Man Over Board) event marker.
• Push [MOB]/[
] to cancel the readout and the
symbol.
#8
POSITION/CURSOR READOUT
(p. 13)
Shows your own ship or cursor latitude and longi-
tude readout when external NMEA data with 0183
format is connected.
• Select ‘SHIP’ or ‘CURS’ in the “POSN DISP” of the
FUNCTION menu.
• To display the POSITION; NMEA 0183 is necessary.
• To display the CURSOR; NMEA 0183 and bearing data
are necessary.
#9
CURSOR INDICATOR
Shows the bearing and distance to the cursor.
$0
VECTOR INDICATOR
(p. 18)
Shows the ATA and OWN vector type.
• T: True vector
• R: Relative vector
$1
VECTOR TIME INDICATOR
(p. 18)
Shows the vector interval time. Select vector time
in the “TRAIL TIME” of the VIDEO menu.
• 30 min. is applied, when ‘
∞
’ is selected for the vector
time.
$2
TRAILS INDICATOR
(p. 12)
Shows the trail time.
• Echo remains with gradation during the trail time period
on the screen. (Except for the trail time;
∞
)
• Progressing time counter starts to count the time until
the timer reaches the trail time.
$3
HEADING INDICATOR
Shows the heading bearing readout.
• The HDG readout indicates the bow of the ship’s bearing
in a clockwise direction from north.
$4
IR INDICATOR
(p. 11)
Eliminates or reduces interference caused by other
radar operating nearby.
• This function is available when the “IR” in the VIDEO
menu is set to 1 or 2.
$5
ECHO STRETCH INDICATOR
(p. 6)
Appears when the echo stretch function is in use.
• This function is available when the “STRETCH” of the
VIDEO menu is turned ON.
$6
CROSS LINE CURSOR
Used for measuring the bearing and distance, set-
ting the alarm zone, selecting the ATA targets, etc.
• Push [
Ù Ú Ω ≈]
several times to move the cursor.
$7
EBL2
(pgs. 15–16)
Used for bearing measurement. When a target is
selected, the EBL readout (
#6
) shows the bearing.
$8
OWN SHIP VECTOR INDICATOR
Shows the vector of your own ship.
$9
VRM 1
(pgs. 15–16)
%0
VRM 2
(pgs. 15–16)
Used for distance measurement. When a target is
selected, the VRM1/2 readout (
%3
) shows the dis-
tance.
%1
NORTH MARK
The north mark shows the true north direction.
%2
EBL1
(pgs. 15–16)
Used for bearing measurement. When a target is
selected, the EBL readout (
#6
) shows the bearing.
%3
VRM1/2 READOUTS
(pgs. 15–16)
Shows the distance of the displayed Variable Range
Markers (VRM1 and VRM2) when the VRM is in
use.
• Nautical miles (NM) and kilometers (KM) can be se-
lected in the FUNCTION menu as the distance unit.
%4
ALARM INDICATOR
(p. 17)
Appears when the alarm function is in use.
%5
ZOOM INDICATOR
(p. 11)
Appears when the zoom function is in use.
• Push [TARGET]/[
] and [TRAILS]/[
] simul-
taneously to turn the function ON or OFF.
%6
TIME INDICATOR
%7
TIME INDICATOR
Shows the estimated time to the marker edge from
center of the marker with current speed.
%8
TIME INDICATOR
Shows the estimated time to the waypoint with cur-
rent speed.
