Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
Morisawa font is used in this product.
PANEL DESCRIPTIONS
Front and side panels
D
[PWR/VOL] knob
Turns ON and OFF the communication
terminal power and adjust audio output
level.
Function display
[ / ] jack
(External microphone/speaker jack)
Connects an optional speaker-micro-
phone or headset for hands-free, full-du-
plex operation.
CAUTION:
Attach the jack cover when
the optional equipment is not used.
Be sure to turn power OFF before con-
necting or disconnecting optional equip-
ment to or from the [ / ] jack.
Function keys
See "
D
Function keys" for details.
Internal speaker
When an optional speaker-microphone
or headset is connected, the internal
speaker cannot be used.
[
] (Address) key
Push each time to select an address-
book from All, Group, Individual and
Telephone.
Selectable addressbook may differ accord-
•
ing to the IP1000C settings.
Push [
•
J
]/[
K
] to select a desired address.
[ ] (Call History) key
Push each time to select call history from
TX log, RX log, TX MSG log, RX MSG
log, TX TEL log and RX TEL log.
Push [
•
J
]/[
K
] to select a desired log.
[
J
] (Up)/[
K
] (Down) keys
Push to select a desired address (ID),
log, message, presence (status) or area
call function.
[FUNC] key
After a desired address selection, push
each time to select a message, presence
(status) or the area call function select
status.
Selectable function may differ according to
•
the IP1000C settings.
Push [
•
J
]/[
K
] to select a desired message,
status or the function setting.
[CLR•
] (Clear•Lock) key
Push momentarily to select a stand-by
•
screen.
Hold down for 1 second each time to
•
turns ON or OFF the key lock function.
Function keys
D
External antenna connector
Attach the supplied antenna.
Or, attach the supplied antenna connec-
tor cap, if the internal antenna is used.
CAUTION: NEVER HOLD
just the at-
tached antenna when carrying the
communication terminal.
[Option] button
Push to hangup a telephone call.
Or, selects one of often used message or
ID, depending on the programming.*
Internal microphone
When VOX (Voice Operated transmis-
sion) function is used, the internal micro-
phone cannot be used.
[PTT] button
During half-duplex mode, hold down to
transmit, and release to receive.
During full-duplex mode, push to make a
call.
Using the BC-202
D
The BC-202 rapidly charges of the Li-ion battery pack.
Charging time for the BP-271: Approximately 2 hours
Charging time for the BP-272: Approximately 3.5 hours
The following item is required.
• An AC adapter (not supplied with some versions).
Desktop charger
Optional: BC-202
AC outlet
Charging
lamp
Battery pack
Transceiver
+ Battery pack
Tapping screws
3.5×30 mm
Turn OFF the power.
AC adapter
(Optional)
Using the BC-211
D
The BC-211 rapidly charges up to 6 battery packs.
Charging time for the BP-271: Approximately 2 hours
Charging time for the BP-272: Approximately 3.5 hours
The following item is required.
• An AC adapter or the DC power cable (OPC-656)
AC outlet
AC adapter
(BC-157S)
Multi-Charger
BC-211
Battery pack
Transceiver
+ Battery pack
Turn OFF the power
BATTERY CHARGING
CALLING PROCEDURES
Voice communication
D
Push [
q
] several times to select a desired addressbook.
Select
•
All
for all stations call,
Group
for group call,
Individual
for individual station call or
Telephone
for extension call.
Selectable adressbook may differ according to the IP1000C's
•
setting.
Push [
w
J
]/[
K
] several times to select a desired ID or ex-
tension number.
Selectable ID or extension number may differ according to the
•
IP1000C's setting.
You can select a desired ID or extension number from call his-
•
tory by pushing [
] for easy recalling.
Push [PTT], then speak into the microphone.
e
Release [PTT] to listen.
r
Repeat the steps
t
e
and
r
.
When full-duplex mode is selected at the IP1000C, the steps
r
and
t
are not necessary. Just speak into the microphone
of the connected headset, the received audio is heard from
the headset speaker at the same time.
When hanging up the extension call communication, push
[Option].
Text communication
D
Push [
q
] several times to select a desired addressbook.
Select
•
All
for all stations call,
Group
for group call,
Individual
for individual station call or
Telephone
for extension call.
Selectable adressbook may differ according to the IP1000C's
•
setting.
Push [
w
J
]/[
K
] several times to select a desired ID or ex-
tension number.
Selectable ID or extension number may differ according to the
•
IP1000C's setting.
You can select a desired ID or extension number from call his-
•
tory by pushing [
] for easy recalling.
Push [FUNC] several times to select a desired item.
e
Select
•
Message
for message transmission,
Presence
for sta-
tus transmission, or
Area
for a limited area call.
Push [PTT] to make a call.
r
Message or status is transmitted.
•
If
•
Area
is selected in the step
e
, go to the next step.
While holding [PTT] speak into the microphone to an-
t
nounce a message.
