Icom IP100H, Инструкция по эксплуатации, Страница: 19 / 33

4
CALLING OPERATION
4-5
Voice communication
Individual call D
Push [
q
] one or more times to select “Individual.”
Push [
w
J ] or [ K ] one or more times to select a desired
individual address (ID).
Push [PTT] to call.
e
• When your call is successful, “Connected” may be
displayed and beeps may sound, depending on your
IP1000C's settings.
Hold down [PTT] and then speak at your normal
r
voice level.
Release [PTT] to listen.
t
Repeat the steps
y r
and
t
until you finish your con-
versation.
All call
D
Push [
q
] one or more times to select “All.”
Push [PTT] to call.
w
Hold down [PTT] and say your message at your nor-
e
mal voice level.
Release [PTT] to listen.
r
Group call D
Push [
q
] one or more times to select “Group.”
Push [
w
J ] or [ K ] one or more times to select a desired
group address (ID).
Push [PTT] to call.
e
Hold down [PTT] and say your message at your nor-
r
mal voice level.
Release [PTT] to listen.
t
Telephone call D
Push [
q
] one or more times to select “Telephone.”
Push [
w
J
] or [
K
] one or more times to select a desired
extension number (ID).
Push [PTT] to call.
e
Wait until reply is heard.
r
After the reply, hold down [PTT] and then speak at
t
your normal voice level.
Release [PTT] to listen.
y
Repeat the steps
u t
and
y
until you finish your con-
versation.
To hang up the call, push [Option].
i
[PTT]
[Option]
For your reference
Only one terminal can reply to an All or Group call.
We recommend you to carefully listen for a reply after
you making an All or Group call.
When the VOX function or full-duplex mode is set at
the IP1000C, the [PTT] toggling between transmit and
listen is not necessary.
When the VOX function is set, speak into the headset
microphone to transmit, stop speaking to listen.
In full-duplex, you can speak and hear the other per-
son at the same times.
NOTE:
Use one of the following options for full-duplex
operation.
• HM-153LS
• HM-166LS
• HS-85 with OPC-2144
• HM-153 with OPC-2144
• HM-166 with OPC-2144