1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7119W-1EX-
q
Printed in Japan
© 2014–2015 Icom Inc.
2. INSTALLING THE IP100FS
• Make sure Windows has completed its start-up,
and no other applications are running.
• Make sure you are logged in as the administrator.
Insert the USB flash drive into the USB port.
Double-click “IP100FS_Setup.exe” in the REMOV-
ABLE drive.
If the “User Account Control” window appears, click
[Yes] to continue.
Click [Next >].
NOTE:
If your PC has already installed the software, the
uninstallation or update screen appears.
1
2
These Instructions are based on using Windows 7.
3. STARTING THE IP100FS
NOTE:
Before starting the IP100FS, connect the speaker, headset or microphone that you are going to use.
The location of the [USB] port may differ,
depending on your PC. Refer to the PC’s
instruction manual on the USB port for details.
To the [USB] Port
USB flash drive
3
4
5
Click [Next >].
Click [Install].
Click [Finish].
6
7
8
Click the IP100FS icon in the Start
menu.
• You can also start the software by simply double-
clicking the IP100FS icon on your desktop.
• If the “User Account Control” window appears, click
[Yes] to continue.
1
2
Click “Option” on the Menu Bar, and then click
“Setting....”
To log in as the administrator enter:
User ID .......................
admin
Password ....................
admin
NOTE on the USB flash drive:
• The USB flash drive must be inserted into the USB port
when installing and starting the IP100FS.
• Remove the USB flash drive from the USB port before
restarting or shutting down the PC, otherwise you may
lose your data, or damage the device.
• Remove the USB flash drive from the USB port after
completing the site settings.
FURTHER INFORMATION
Removing the USB flash drive
D
Click the <Safely Remove Hardware and Eject Me-
q
dia>
icon in the task tray, and then click <Eject RE-
MOVABLE>, as shown below.
• Refer to your PC’s instruction manual if the <Safely
Remove Hardware and Eject Media> icon does not ap-
pear in your task tray.
w
Remove the USB flash drive when the <Safe To
Remove Hardware> message is displayed.
Double-click
Click
If you want to install the software in a differ-
ent location, click [Change...] then select a
desired location on the displayed screen.
Click
Click
Click
3
The IP100FS login window appears.
• The user ID and password listed below are set as
default.
Set the sites, destinations and so on on the dis-
played software screen.
• Refer to the IP100FS Help file for more details on
the settings.
4
Uninstalling the IP100FS
D
Follow the instructions below to uninstall the IP-
100FS.
• Make sure you are logged in as the administrator.
Click the <Start> button and then click <Control
q
Panel>.
Click <Uninstall a program>.
w
Right-click <Icom IP100FS #11>, and then click
e
<Uninstall>.
Click [Yes] in the uninstallation confirmation dialog.
r
If the “User Account Control” dialog appears, click
t
[Yes] to uninstall.
Reinstalling the IP100FS
D
Once the uninstalling is complete as described above,
you can reinstall the IP100FS by following the steps in
“2 INSTALLING THE IP100FS.”
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the
United Kingdom, Germany, France, Spain, Russia, and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
