Icom iM423, Инструкция по эксплуатации

Страница: 32 / 108

23
7
DSC OPERATION
A Distress call should include the ship’s position and time. If
no GPS is connected, your position and UTC (Universal Time
Coordinated) time should be manually input. They are auto-
matically included when a GPS receiver compatible with the
NMEA0183 ver. 2.0 or 3.01 format is connected.
• Manual programming is disabled when a GPS receiver is
connected.
• Manually programmed position and time will be held for
only 23.5 hours.
Enter “POSITION INPUT” in the DSC SETTINGS menu.
q
Edit your latitude and longitude position using Dial, or [
w
Y
]/
[ Z ]/[ Ω ]/[ ≈ ].
• Select a desired number using Dial, or [
Y
]/[
Z
]/[ Ω ]/[ ≈ ].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Select N (North latitude) or S (South latitude) when the cursor is
on the ‘N’ or ‘S’ position.
• Select W (West longitude) or E (East longitude) when the cursor
is on the ‘W’ or ‘E’ position.
After entering the position, push [ENT] to program it.
e
The UTC time programming screen is displayed, enter the
r
UTC time in the following way:
• Select a desired number using Dial, or [ Y ]/[ Z ]/[ Ω ]/[ ≈ ].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
Push [ENT] or Dial to program your position and time.
t
• Return to the “DSC SETTING” screen.
Position and time programming
■

MENU

➪

DSC Settings

➪

Position Input

(Push [MENU]) (Rotate Dial, then push [ENT].)