![background image](http://html1.mh-extra.com/html/icom/ifc-30lt/ifc-30lt_manual_2038200023.webp)
WILL HAVE TO SELECT
« BANK » 2
USING
P 1
AND CHECK THAT FIGURE
2
IS
DISPLAYED IN THE TOP LEFT CORNER.
NOTE FOR USING CHANNELS STORED IN BANKS you will have to select the correct
bank by pressing
P 1
(
« bank » 2 in our example) and then rotate the channel selector
to channel 5 to transmit and receive on this channel.
IF YOU WANT TO SAVE YOUR FREQUENCY ON « BANK » 1, THE SELECTION OF THE
BANK WILL STILL HAPPEN USING
P 1
BUT YOU WILL HAVE TO PRESS THIS
BUTTON UNTIL NO FIGURE APPEARS ON THE TOP PART OF THE DISPLAY
INDICATING YOU ARE IN « BANK » 1.
5
SELECT A CHANNEL NUMBER
Example CHANNEL 8
KEY IN
0
8
CONFIRM USING
CH 08
6 PRESS
SIMULTANEOUSLY ON
AND
8
TO ENTER OUTPUT POWER PROGRAMMING
PWR HI
7
SELECT OUTPUT POWER BY PRESSING
AND
ONCE PWR LO1
TWICE PWR LO2
THREE TIMES PWR HI
PWR LO1
PWR LO2
PWR HI
8
CHOOSE HIGH OUTPUT POWER
9
PRESS
Po
TWICE TO CONFIRM
SET MODE
10 TURN
TRANSCEIVER
OFF
11
YOUR CHANNEL IS NOW PROGRAMMED TO BE
TRANSMITTING WITH HIGH OUPUT POWER
Guideline Télécom MSFB Technical Sheets ICOM IC-F30 LT 05/08/2002
23