Icom iF5061D, Инструкция по эксплуатации

Страница: 17 / 32

12
2
BASIC OPERATION
2
■
User set mode
User set mode can be accessed with ‘Power ON’ function. In
this case, all set mode items are available.
User set mode allows you to set seldom-changed settings
and you can “customize” the transceiver operation to suit your
preferences and operating style.
Entering the user set mode:
q
While pushing and holding [P1] and [P2], push [ ] to turn
the power ON.
• Turn power OFF in advance.
• You should hold [P1] and [P2] until “SET MODE” appears on the
display.
[P1] [P2] [ ]
w
Push and hold [P0] for 1 sec. to enter user set mode.
[P0]
e
Push [P0] several times to select the appropriate item. Then,
push [Up] or [Down] to set the desired level/condition.
• Available set mode functions are Backlight , LCD Contrast ,
Beep
,
Beep Level
,
Ringer Level
,
SQL Level
,
AF Min Level
,
Mic Gain , Battery Voltage , Horn , Signal Moni , Lone Worker
and System Info .
[P0] [Up]/[Down]
r
Push and hold [ ] for 1 sec. to turn power OFF, then ON
again to exit set mode.
[ ]
User set mode is also available using a programmable key.
Please refer to p. 7 [User Set Mode]
section for instructions
regarding using the key assigned for user set mode.
[User Set Mode]
is allowed for the quick item selection. Set
“Enable” for the often used items with the CS-F3160/F5060
cloning software
.