background image

8

2

PANEL DESCRIPTION

SCAN TAG KEY

Push to add or cancel the selected channel to the scan group.

PRIORITY CHANNEL KEYS

Push to select Priority A or Priority B channel.

Push and hold [Prio A (Rewrite)] to rewrite the Prio A chan-
nel.

MR-CH 1/2/3/4 KEYS

Push to select an operating channel directly.

MONITOR KEY

Activates one of (or two of) the following functions on each
channel independently:
• Push and hold to un-mute the channel (audio is emitted;

‘Audible’ condition).

• Push to mute the channel (sets to ‘Inaudible’ only).
• Push to un-mute the channel (sets to ‘Audible’ only).
• Push after the communication is finished to send a ‘reset

code’.

NOTE:

The un-mute condition (‘Audible’ condition) may

automatically return to the mute condition (‘Inaudible‘ con-
dition) after a specified period.

LOCK KEY

Push and hold to electronically lock all programmable keys
except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergency].

OUTPUT POWER SELECTION KEY

Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.

• Ask your dealer for the output power level for each selection.

C.TONE CHANNEL ENTER KEY

Push to select the continuous tone channel using 
[CH Up]/[CH Down] to change the tone frequency/code set-
ting after pushing this key for permanent operation.

TALK AROUND KEY

Turn the talk around function ON and OFF.

• The talk around function equalizes the transmit frequency to the

receive frequency for transceiver-to-transceiver communication.

WIDE/NARROW KEY

Push to toggle the IF bandwidth between wide and narrow.

• The wide passband width can be selected from 25.0 or 20.0 kHz

using the CS-F33G 

CLONING SOFTWARE

. Ask your Dealer for details.

!IC-F44GT_GS.qxd  04.5.7 1:47 PM  Page 8 (1,1)

Содержание iF44GS

















































Отзывы: