![background image](http://html1.mh-extra.com/html/icom/if3200dex-series/if3200dex-series_operating-instructions-manual_4733680018.webp)
3
BASIC OPERATION
3-6
Receiving and transmitting (Continued)
DTMF transmission
D
If the transceiver has [DTMF Autodial] assigned to it,
you can use the automatic DTMF transmission func-
tion.
Push [DTMF Autodial] to transmit the DTMF code.
➥
The dispatcher can send a command signal that will
stun, kill or revive your transceiver.
When the Stun command is received, a beep sounds*,
and the transceiver becomes unusable. Receiving a
Revive command is necessary to operate the trans-
ceiver again in this case.
When the Kill command is received, a beep sounds*,
and the transceiver becomes unusable. Cloning the
transceiver is necessary to operate the transceiver
again in this case.
*Depending on the presetting.
Receiving a Stun, Kill and Revive command
D