19
4
RING FUNCTION
New master
‘
‘
Smart-Ring
The ring function has an answer back feature. This allows you to
confirm whether or not a call has reached the member of your
group even if the operator is temporarily away from the transceiver.
D
D
Smart-Ring operation
(see right)
q
Set the same operating channel and CTCSS tone* code for all of
your group transceivers.
w
Push [S-Ring/C-Ring] to send the Smart-Ring call.
• When a member of your group station answers your call, then
the transceiver emits beep tones for every 30 sec. and TX/RX
indicator blinks with an orange color.
• Push [MONI] to cancel the Ringer beep and indication.
• When no answer comes back, the transceiver emits short fail-
ure beep tones.
e
Push [PTT] to answer the call and to stop the beeps and blink-
ing.
‘
‘
Call-Ring
Sends the pre-selected ring tone to your group members.
D
D
Select the Call-Ring melody
q
While pushing and holding [PTT] and [S-Ring/C-Ring], rotate
[VOL] to turn the power ON.
• A sample melody is emitted.
w
Rotate [CH] to select the ringer melody.
• Push [S-Ring/C-Ring] to monitor the selected melody once
more.
e
Turn the power OFF to determine the melody.
*NOTE:
This function is available only when the called station
has use the same CTCSS tone code and the same operating
channels as you.
IC-F22SR-(1) 02.3.23 2:29 PM Page 24 (1,1)