24
2
IDAS OPERATION
Transmitting a call (Continued)
■
Direct message input
D
(10-key version only)
Push [Digital Button] to enter the application selection
q
mode.
• “VOICE” appears.
• To change the call type, hold down [Digital Button] for 1 second
while in the standby mode. After changing, the transceiver auto-
matically enters the application selection mode.
Push [CH Up] or [CH Down] to select “MSG.”
w
Push [Digital Button] again to enter the message selection
e
mode.
• The preprogrammed message is displayed.
Push [
r
M
] or [#] to enter the message editing mode.
• The first character blinks when [#] is pushed, the last character
blinks when [
M
] is pushed.
Push the appropriate
t
numeric key, [0] to [9], to enter the
desired character.
• See the table to the right for the selectable characters.
• Pushing [CH Up] also enters space, pushing [CH Down] deletes
the selected character.
Push [#] to move the cursor to the right, push [
y
M
] to move
the cursor to the left.
Repeat steps
u
t
and
y
to set the desired text message.
Hold down [Digital Button] for 1 second to overwrite the set
i
message into the message memory.
• Push [Digital Button] momentarily to cancel the editing and re-
turn to the original message display.
• Available characters
Key
Characters
[0]
0 | ! ? ’ ” , ; : _ ( ) < > [ ]
[1]
1 (space) #
✳
/ + – = \ & % $ @ ^
[2]
2 A B C a b c
[3]
3 D E F d e f
[4]
4 G H I g h i
[5]
5 J K L j k l
[6]
6 M N O m n o
[7]
7 P Q R S p q r s
[8]
8 T U V t u v
[9]
9 W X Y Z w x y z
