23
23
4
DRIVER INSTALLATION
2001 NEW
D
Microsoft
®
Windows
®
98SE/Me
q
Start up Windows.
w
Connect the PC and the ID-RP4000V [SERVICE T]
connector through a USB cable
(A-B type; purchase
separately)
.
e
Right click “My Computer” then select “Properties.”
Click
Click
r
“System Properties” screen appears as at left.
Click [Device Manager] tub.
t
Click “ ” of Ports (COM&LPT).
Check the connected unit and connector names,
and COM port number.
(In this example, the USB serial port number is “3.”)
y
Confirm “ICOM ID-RP4000V SERVICE T (COM
Q
)”
is displayed.
• If not displayed, or few COM port numbers are dis-
played at the same time, the driver installation may not
be installed properly. Un-install the USB driver then re-
install the driver again in such cases.
NOTE:
“
Q
” is the COM port number, that is
used for the communication setting with the util-
ity software.
<e.g.: When driver re-installation is required>
“ICOM ID-RP4000V SERVICE T (COM
Q
) (COM
Q
)”
