manualshive.com logo in svg

Icom ID-RP2C, Инструкция по эксплуатации, Страница: 2 / 36

Поделиться
Скачать
Icom ID-RP2C Скачать руководство пользователя страница 2

2001 NEW

IMPORTANT

READ THIS INSTRUCTION MANUAL 

CAREFULLY

 

before installing or operating the 

repeater.

SAVE THIS INSTRUCTION MANUAL.

 This 

manual contains important safety and operating 
instructions for the ID-RP2 system.

EXPLICIT DEFINITIONS

i

WORD

DEFINITION

R

 

DANGER!

Personal death, serious injury or an ex-
plosion may occur.

R

 

WARNING!

 

Personal injury, fire hazard or electric 
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

 

If disregarded, inconvenience only. No risk 
or personal injury, fire or electric shock.

PRECAUTIONS

R

 DANGER! 

ID-RP2 installation, is intended for professional 

installation only. We are not responsible for any building 
breakage, any damage resulting from a drop of the antenna 
from a high place or unstable site or resulting from any 
personal injury nor any accident in any other cases. Be sure 
to consult an expert engineer for installations.

R

 WARNING RF EXPOSURE!

 This device emits Radio 

Frequency (RF) energy. Extreme caution should be 
observed when operating this device. If you have any 
questions regarding RF exposure and safety standards 
please refer to the Federal Communications Commission 
Office of Engineering and Technology’s report on Evaluating 
Compliance with FCC Guidelines for Human Radio 
Frequency Electromagnetic Fields (OET Bulletin 65).

R

 WARNING HIGH VOLTAGE! NEVER

 attach an antenna 

or internal antenna connector during transmission. This may 
result in an electrical shock or burn.

R

 WARNING HIGH VOLTAGE! NEVER

 install the antenna 

at any location where a person could easily touch the 
antenna during transmission. This may result in an electrical 
shock or burn.

R

 WARNING! NEVER

 apply AC to the [DC 13.8V IN] 

connector. This could cause a fire or damage the repeater.

R

 WARNING! NEVER

 apply more than 16 V DC to the 

[DC 13.8V IN] connector on the repeater. This could cause 
a fire or damage the repeater.

R

 WARNING! NEVER

 let metal, wire or other objects touch 

any internal part or connectors on the repeater. This may 
result in an electric shock or this could cause a fire or may 
damage the repeater.

R

 WARNING! NEVER 

operate or touch the repeater unit, 

ID-RP2C, ID-RP2D and ID-RP2V, with wet hands. This may 
result in an electric shock or may damage to the repeater 
unit.

R

 WARNING! NEVER 

connect the repeater to a power 

source using reverse polarity. This will damage the repeater.
Make sure the repeater power is turned OFF when connect-
ing a power supply.

DO NOT

 use or place the repeater unit, ID-RP2C, ID-RP2D 

and ID-RP2V, in areas with temperatures below –10°C 
(+14°F) or above +50°C (+122°F). 

DO NOT 

place the repeater unit, ID-RP2C, ID-RP2D and 

ID-RP2V, in excessively dusty environments or in direct 
sunlight.

DO NOT 

place the repeater unit, ID-RP2C, ID-RP2D and ID-

RP2V against walls or putting anything on top of the units. 
This will obstruct heat dissipation.

DO NOT

 use harsh solvents such as benzine or alcohol 

to clean the repeater, as they will damage the repeater’s 
surfaces. If the repeater becomes dusty or dirty, wipe it clean 
with a soft, dry cloth.

DO NOT 

modify the repeater for any reason.

Place the repeater in a secure place to avoid inadvertent use 
by children.

Use the specified fuse only.

For U.S.A. only

CAUTION:

 Changes or modifications to this repeater, not 

expressly approved by Icom Inc., could void your authority to 
operate this repeater under FCC regulations.

Icom is not responsible for the destruction or damage to 
the Icom product, if the malfunction is because of:
•  Force majeure, including, but not limited to, fires, earth-

quakes, storms, floods, lightning, other natural disasters, 
disturbances, riots, war, or radioactive contamination.

•  The use of Icom products with any equipment that is not 

manufactured or approved by Icom.

Icom, Icom Inc. and Icom logo are registered trademarks of Icom 
Incorporated (Japan) in Japan, the United States, the United 
Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, 
and/or other countries.
Microsoft, Windows is either registered trademarks or trademarks 
of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks 
of their respective holders.

Содержание ID-RP2C





































Отзывы:

Нет отзывов