22
4
DRIVER INSTALLATIONS
■
COM port confi rmation
After the driver installation, confirm the driver avail-
ability and the port number are recommended.
In this section, COM port number confi rmation of the
ID-RP2000V [SERVICE T] connector is used for in-
struction example.
D
Microsoft
®
Windows
®
XP/2000
q
Start up Windows.
w
Connect the PC and the ID-RP2000V [SERVICE T]
connector through a USB cable
(A-B type; purchase
separately)
.
e
Right click “My Computer” then select “Properties.”
•
“My Computer” is available in <Start> menu with Win-
dows XP.
Click
Click
r
“System Properties” screen appears as at left.
Click [Hardware] tub and then click [Device Man-
ager].
Click
t
“Device Manager” screen appears.
Click
“ ” of Ports (COM&LPT).
Check the connected unit and connector names,
and COM port number.
(In this example, the USB serial port number is “3.”)
y
Confi rm “ICOM ID-RP2000V SERVICE T (COM
✱
)”
is displayed.
•
If not displayed, or few COM port numbers are dis-
played at the same time, the driver installation may not
be installed properly. Un-install the USB driver then re-
install the driver again in such cases.
NOTE:
“
✱
” is the COM port number, that is
used for the communication setting with the util-
ity software.
<e.g.: When driver re-installation is required>
“ICOM ID-RP2000V SERVICE T (COM
✱
) (COM
✱
)”
