background image

5

D-STAR OPERATION (ADVANCED)

5-35

Entering new information into the repeater list

Step 17. Entering the longitude

 

L

This item is displayed only when 

Step 15. 

Selecting the position data accuracy level

 is set 

to “Approximate” or “Exact�”

1�  Select “LONGITUDE�”

2�  Rotate [DIAL] to enter the longitude� 

 

L

Push D-pad(

) to move the cursor�

 

L

To enter an east longitude, select “E,” and to enter a 

west longitude, select “W�”

3�  After entering, push [ENT]�

Step 18. Setting the UTC offset

 

L

Universal Time Coordinated (UTC) offset is the time 

difference between UTC and repeater local time� 

This is a useful function to know the repeater’s local 

time before you make a call� (p� 5-13)

1�  Select “UTC OFFSET�”

2�  Rotate [DIAL] to set the time difference between 

UTC and the local time, then push [ENT]� 

 

D

Entering new information into the repeater list

Step 19. Saving the repeater list

1�  Select “<<Add Write>>�”

 • The confirmation dialog is displayed�

2�  Select “YES�” 

 • The entered contents are saved to the repeater list, 

and the display returns to the selected repeater group 

screen�

TIP: To cancel the entered data

1�  Push [CLR] to display the “Cancel edit?” window�

2�  Select “YES�” 

 • Cancels the entry and returns to the selected 

repeater group screen�

Содержание ID-52A








































































































































































































































































Отзывы: