Icom ID-50A, Основное руководство

Страница: 15 / 88

PANEL DESCRIPTION
1
2
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
10
MAIN • DUAL KEY [MAIN]/[DUAL]
z
Push to set the A or B band as the MAIN band. (p. 11)
z
Hold down for 1 second to turn the Dualwatch function ON or OFF. (p. 11)
11
ENTER KEY [ENT]
Push to set the selected item or option.
12
DR • D-PAD (DOWN) KEY [DR]/D-pad(

)
z
Hold down for 1 second to turn the DR function ON or OFF. (p. 14)
z
In the DR screen, MENU screen, or Quick Menu window, push to move the option
or value selector bar down. (pp. 13, 21, 47)
13
QUICK MENU • SPEECH KEY [QUICK]/[SPCH]
z
Push to open the Quick Menu window. (p. 13)
z
Hold down for 1 second to audibly announce the displayed frequency and operating
mode, or call sign. (p. 17)
14
MEMORY • SELECT MEMORY WRITE KEY [MR]/[MW]
z
Push to enter the Memory mode. (p. 14)
L
For the ID-50A only
In the Memory mode, push once to enter the Weather Channel mode.
z
Hold down for 1 second to open the Select Memory Write window. (p. 23)
z
Hold down for 3 seconds to enter the Memory channel contents into a blank channel.
15
VFO/MHz • CLEAR • CALL KEY [V/MHz]/[CLR]/[CALL]
z
Push to enter the VFO mode. (p. 14)
z
In the VFO mode, push to select 1 MHz tuning steps. (p. 16)
z
In the MENU screen, push to select an upper-tier menu. (p. 21)
z
Push to delete an entered character. (p. 44)
z
Hold down for 1 second to enter the Call Channel mode. (p. 14)
16
LO • D-PAD (RIGHT) KEY [LO]/D-pad(

)
z
Hold down for 1 second to open the Select Output Power window. (p. 20)
z
In the MENU screen, push to select a lower-tier menu. (p. 21)
17
RX CALL SIGN CAPTURE • D-PAD (UP) KEY [ RX→CS]/D-pad(

)
z
Hold down for 1 second to capture the calling stationʼs call sign. (p. 53)
z
In the DR screen, MENU screen, or Quick Menu window, push to move the value or
option selector bar up. (pp. 13, 21, 47)
18
VOLUME CONTROL [VOL]
Rotate to adjust the audio level. (p. 7)
19
CONTROL DIAL [DIAL]
z
Rotate to select an operating frequency. (p. 16)
z
In the Memory mode, rotate to select a Memory channel.
z
Rotate to select a setting item or value.
z
In the Character Entry mode, rotate to enter characters.
20
EXTERNAL MICROPHONE • SPEAKER JACK [MIC/SP]
Connect an optional speaker microphone or headset.
(SP: 3.5 mm (1/8 inch), MIC: 2.5 mm)
L
Confirm that the transceiver is OFF before connecting or disconnecting optional equipment.
21
EXTERNAL DC IN JACK [DC IN]
Connects to an optional battery charger to charge the attached battery pack. (p. 6)
22
USB PORT (Type-C) [USB]
Connects to an external power source, a PC, or other USB devices.
L
Not compatible with USB Power Delivery.