47
11
DIGITAL MODE OPERATION
11
D
D
To store a received call
q
Push
[A•
FUNC
]
and
[0•
OPT
]
to enter
OPTION SET MODE
, then
push
[
Y
Y
]
or
[
Z
Z
]
several times to select the call sign select
mode.
• “yUC” appears for station call sign.
• “R1C” or “R2C” appears for repeater call sign.
w
Push and hold
[0•
OPT
]
for 1 sec. to display call sign, rotate
[VOL]
to select the blank channel or erasable channel.
e
Push
[0•
OPT
]
then, push
[
Y
Y
]
or
[
Z
Z
]
several times to select
the received call indication.
• “RXC.AL” appears for received station call sign.
• “R1C.AL” or “R2C.AL” appears for received repeater call sign.
r
To con
fi
rm the received call, push and hold
[0•
OPT
]
for 1
sec. to enter the received call sign indication mode.
t
Push and hold
[0•
OPT
]
for 1 sec. to store the call sign into
the selected (in step
w
) station call sign channel or re-
peater call sign channel.
■
Break-in communication
The break-in function allows you to break into an another sta-
tion’s communications in both digital voice and low-speed
data operation.
q
While receiving another station’s communication, push
[A•
FUNC
]
then
[0•
OPT
]
to enter
OPTION SET MODE
.
w
Push
[
Y
Y
]
or
[
Z
Z
]
several times to select the break-in set-
ting, then turn the break-in setting ON.
• “bRk” appears.
e
When both stations are in standby, transmit to send a
break-in call.
• Programmed call sign station receives the break-in call as well
as your own call sign.
r
Wait for the reply call from the station who receives the
break-in call.
t
After you receive a reply, communicate normally.
y
To cancel the break-in, push
[A•
FUNC
]
and
[0•
OPT
]
, then ro-
tate
[VOL]
to turn OFF.
