■
Setting tuning steps
The transceiver has 9 tuning steps* (each band has indepen-
dent settings) as follows:
5 kHz
10 kHz
12.5 kHz
15 kHz
20 kHz
25 kHz
30 kHz
50 kHz
100 kHz
*The 5 and 15 kHz steps are not available on the 1200 MHz band.
➀
Push [VFO] to select VFO mode.
➁
Push [MULTI(
↔
)] to select the desired band.
➂
Push [MULTI] for 1 sec. to enter set mode.
➃
Push [MULTI(
↕
)] one or more times
until “TS” appears.
➄
Push [MULTI(
↔
)] (or rotate [DIAL])
to select the desired tuning step.
➅
Push [VFO] to exit set mode.
✔
CONVENIENT
Select a tuning step that matches the frequency intervals of
repeaters in your area.
10
4
BASIC OPERATION
D
Via the keypad
(from the decimal point)
➀
Push [VFO] to select VFO
mode.
➁
Push [•] to leave the MHz
setting as is and input from
the kHz digits.
D
Other methods
➥
Via the [DIAL]:
Rotate [DIAL] to change the frequency ac-
cording to the set tuning steps.
➥
Via the MHz STEP:
Push [
(VFO)
MHz] for 1 sec., then ro-
tate [DIAL] to change the frequency in 1 MHz steps.
USING
SET MODE
5
8
0
.
[Example]
15 kHz tuning step
25 kHz tuning step
IC-T81A/E Manual-(1) 01.12.5 6:55 PM Page 10 (1,1)