■
Setting a frequency
q
Select VFO mode with [V/M].
w
Select the desired band with [BAND].
e
Rotate [DIAL] to change the frequency.
• The frequency changes according to the preset tuning steps. See
the right section for selecting the tuning step.
• Rotate [DIAL] while pushing [FUNC] to change the frequency in 1
MHz steps (default; p. 29).
The 1 MHz tuning step (dial select step) can be set to 100
kHz, 1 MHz or 10 MHz tuning steps in set mode. See p. 29
for details.
■
Setting a tuning step
Tuning steps can be selected for each band. This transceiver
has 10 tuning steps as follows:
• 5 kHz
• 6.25 kHz • 10 kHz
• 12.5 kHz • 15 kHz
• 20 kHz
• 25 kHz
• 30 kHz
• 50 kHz
• 100 kHz
D
Using the band switch
q
Select VFO mode with [V/M].
w
Select the desired band with [BAND].
e
Push [BAND] for 2 sec. to enter tuning step setting condi-
tion.
r
Rotate [DIAL] to select the desired
tuning step.
t
Push [BAND] to return to normal
operation.
D
Using set mode
q
Select VFO mode with [V/M].
w
Select the desired band with [BAND].
e
Push [V/M] for 2 sec. to enter set mode.
r
Rotate [DIAL] until “STEP” appears.
• “STEP” disappears after 1 sec. and the previously selected tun-
ing step and “tS” appear.
t
While pushing [FUNC], rotate [DIAL] to select the desired
tuning step.
y
Push [V/M] to exit set mode.
7
3
FREQUENCY AND CHANNEL SETTING
15 kHz tuning step
FM
75
50
25
75
50
25
FM
75
50
25
75
50
25
[DIAL] changes the frequency according
to the selected tuning step.
While pushing [FUNC], [DIAL] changes
the frequency in 1 MHz steps (default).