Icom IC-PCR1500, Инструкция по эксплуатации

Страница: 98 / 148

90
7
SCAN OPERATION (Multi-function receiver/Component screens only)
■
Scan resume condition
When receiving a signal, scanning automatically pauses on
that signal. The scan resume condition sets the time that the
scan pauses before resuming or whether scan stops instead
of pausing.
q
Click the
z
SET
x
button to call up the [Scan Delay] screen if
it is not displayed.
w
Select the scan delay condition from ‘Pause until Signal
Disappears,’ ‘Delay Volume’ or ‘Scan Stop.’
(a) ‘Pause until Signal Disappears’
Scan pauses when receiving a signal and remains
paused until the signal disappears.
(b) ‘Delay Volume’
When setting a delay time using the [DELAY] control
(on [Receiver] screen or Component screen), scan
pauses when receiving a signal and then resumes after
the specified delay.
(c) ‘Scan Stop’
When a signal is received during scan, scan stops and
does not resume.
e
Select a restart delay time in [Restart Delay]. This setting is
valid when (a) or (b) is selected in step
w
.
• 0 Sec. : Scan resumes immediately after the signal dis-
appears.
• 1 Sec. : Scan resumes 1 sec. after the signal disappears.
• 2 Sec. : Scan resumes 2 sec. after the signal disappears.
r
Click the close ([X]) button to close the setting screen.
• [Scan Delay] screen
q
Select
w
Select
e
Click
METER/SCAN
MAIN SUB
MAIN SUB
• [Compo] screen
• [Receiver] screen
IC-PCR2500 IC-PCR1500
IC-PCR2500 IC-PCR1500
z SET x
z SET x