Icom IC-M94D Скачать руководство пользователя

Страница: 68 / 88

OTHER FUNCTIONS

■

Navigation

The transceiver assists you to navigate to a selected destination from your current position.

You can select a AIS target during navigation.

The function cannot work while in the MOB mode.

NOTE:

IC-M94D/IC-M94DE’s Navigation function is a supplemental aid to navigation

only, and is not intended to be a substitute for primary Navigation equipment.

Using

1. Push

on the operating screen.

•The “Waypoint” screen is displayed.

Push [▲] or [▼] to select a waypoint.

Push

to sort the waypoints by Name or Range.

3. Push

or [ENT] to start navigation.

•The plotter screen is displayed, and the transceiver starts to

navigate

•

is displayed on the plotter screen.

4. Push the Software Key below for your next operation.

(DSC)

Displays the “Compose Other” screen to send

an Individual call. (p. 28)

Displayed only when a target is selected.

(Stop)

Stops navigation. (p. 60)

(MOB)

Starts the MOB mode. (p. 58)

The transceiver automatically exits the

Navigation mode.

(Range)

Selects the display range. (p. 46)

(Target

▲

)

Selects the farthest target from your vessel.

(Target

▼

)

Selects the closest target to your vessel.

(Detail)

Displays the details on the selected target.

(p. 50)

Displayed only when the target is selected.

Push

to return the plotter screen.

(List)

Selects the list screen that you want to

display. (p. 47)

Starting navigation

There are 3 ways of setting a destination, using

, selecting on the AIS screen, and

selecting in the Waypoint list.

NOTE:

A popup screen is displayed when the vessel arrives at or near the destination.

To stop the function, push any key.

When the Audible Alarm function is set to “ON,” an alarm also sounds. (p. 60)

Содержание IC-M94D

























































































Результаты поиска

Содержание IC-M94D

Отзывы:

Похожие инструкции для IC-M94D

Бренды по названию

Популярные бренды

Icom IC-M94D, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M94D

Отзывы:

Похожие инструкции для IC-M94D

Бренды по названию

Популярные бренды